Roland MDX-50 Milling Machine Specifications
| MODEL | MDX-50 | |
|---|---|---|
| Acceptable materials* | Resins such as chemical wood and modeling wax (metal not supported) | |
| Operating range | X: 400mm (15.80in) Y: 305mm (12.00in) Z: 135mm (5.315in) |
|
| Table size | W: 400mm (15.80in) D: 305mm (12.00in) |
|
| Loadable workpiece size | X: 400mm (15.80in) Y: 305mm (12.00in) Z: 100mm (3.90in) |
|
| Axis drive | Stepper Motor | |
| Feed rate | XY: 7 to 3600mm/min (0.3in to 141.7 in/min) Z: 7 to 3000 mm/min (0.3 to 118.1 in/min) |
|
| Software resolution | RML-1: 0.001 mm/step NC code: 0.001 mm/step | |
| Mechanical resolution | 0.01 mm/step (0.39 mil/step; half step) |
|
| Spindle motor | Brushless DC motor | |
| Spindle rotation speed | 4500 ～ 15000 rpm | |
| Tool chuck | Collet | |
| Tool Change Method | AutomaticTool Changer (ATC) | |
| ATC Magazine Capacity | ||
| 5 Tools + 1 Detection pin (6 Position Capacity) | ||
| Tool Shank Diameter | 6.35, 3.175mm (0.250in, 0.125in) |
|
| Operating noise | During operation | |
| Dust box dimmensions | 600 x 700 x 95mm (23.62 x 27.65 x 3.74in) |
|
| Interface | USB | |
| Power requirements (VAC/A) | AC 100 to 240 V ±10%, 50/60 Hz, 1.2 A (Overvoltage Category: II, IEC 60664-1) |
|
| Power consumption (W) | ≈ 95W | |
| Acoustic noise level (dB) | No-load operation: | 60 dB (A) or less |
| Standby: | 45 dB (A) or less | |
| External Dimensions | Width X Depth x Height: | 29.92 × 35.43 × 28.82 in (760 × 900 × 732 mm ) |
| Weight | 122kg (269lb) | |
| Installation environment | Indoor use at altitudes | Up to 2000 m (6500ft) |
| Temperature | 5 to 40°C (41 to 104°F) | |
| Humidity | 35 to 80%RH (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, USB cable, manual, Roland DG Software Package CD, detection pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool positioner, Z0 sensor |
|
| Optional ZCL-50A Rotary Axis UnitOperating range X: 363mm (14.29 in) – Machine Coordinates 37 to 400 mm (1.46 to 15.75 in) Y: 305 mm (12.01 in) Z: 125 mm (4.92 in) A: A: ±2146680° (approximately ±5963 rotations)Loadable workpiece size120mm (4.72 in) – 60mm (2.36 in) maximum radius from center of rotationLoadable workpiece length380mm (14.96 in)Workpiece clamp thickness10 to 65mm (0.39 to 2.56 in) or 20 to 68mm (0.79 to 2.68 in) DiameterA axis motorStepper MotorMechanical Resolution0.0225°/step (half step)DimensionsWidth X Depth x Height:578 × 190 × 128 mm (22.76 × 7.48 × 5.04 in)Weight7kg (15.43 lb)Included ItemsDetection bar, cap screws, user’s manual |